Includes Prime UV system for one web
2001 Tensor Model 1400 single-width, single around
Cutoff 22” (560mm) - Web width maximum designed 35”
2001 Vintage, one (1) tower was added new in 2006
(2x) H50 half & quarter page folders each with air former boards, cross-head perforation, softener and under folder web leads
• (1) upper former on folder “A” with air former board
• (1) Cary 3-web ribbon deck over folder “B” for 32 page tabloid
(4x) 150HP ABB controllers with Four (4) 150HP drive motors with blowers
(2x) main operating consoles
(6x) 4-high Tensor 1400 printing towers each with:
• Slot Plates and Reel Rod blankets (narrow gap)
• CC1 closed loop registration (auto register) motorization with two cameras for each four color web
• EPG automatic inking system with pre-sets and two consoles
• Automatic ink levelers
• Spiral brush dampening
• Full-page motorized compensator
• Bustle wheels and fan-out roller
(6x) Jardis model FS5036 splicers with integrated hoist and lifter bars and air shafts. 50" roll capacity
(3x) 2-web right angle bars with blowers
(3x) Rudder infeeds on right angle bars
(1x) Baldwin Automix
(1x) fountain solution circulator with chiller
(2x) STI compensating stackers model STIC-2500
All associated spare parts, manuals, mechanical and electrical drawings and press tools
Important Features of this Press:
22" vs. 22.75" is 3 .3% percent savings on whatever web width you are running. Depending on exact image size , a tabloid product may have to narrow the columns slightly . Often extra image area can be found in page gutters.
Jardis Zero-Speed Splicers:
Compared to manual integrated roll stands , running waste savings is around 3.5% depending on basis weight you are running and how many copies you waste on pull up after roll change . There is probably another 1% or so in eliminating butt roll handling and re-winding.
On process color work , the Rudder lnfeeds keep the web tension constant , which dramatically helps
register quality and therefore eliminates waste of at least another 1% to 2%.
CC1 Automatic Registration System:
Each tower has motorized sidelay and circumferential registration. With the use of cameras mounting at the top, full process color can be registered automatically thereby providing a "closed loop" system . This system will reduce the man power needed to operate the six tower press as well as save up to 3% on paper waste.
EPG Automatic Inking System:
With automatic ink adjusting from the console with pre-set ink controls, this also will reduce manpower
and reduce waste. The system is able to "learn" certain print jobs to more accurate pre-set ink each time .
Automatic Ink Levelers:
These eliminate the need for press operators to fill the ink fountains. On a tower press, it is a great labor
saving device .